Mainstream SuperServer SYS-620P-TRT

2U Mainstream with 8 hot-swap SATA bays, 6 PCIe 4.0 slots and 10GbE

Key Applications

Virtualization
Data Center Optimized
Model analysis
Enterprise Server
Application and data serving
Compute Intensive Applications

Key features

Dual sockets P+ (LGA-4189) 3rd Gen Intel® Xeon® Scalable processors;CPU TDP supports Up to 270W TDP;3 UPI up to 11.2 GT/s
Up to 4TB 3DS ECC RDIMM, DDR4-3200MHz, Up to 4TB 3DS ECC LRDIMM, DDR4-3200MHz ;- Up to 4TB Intel® Optane™ Persistent Memory 200 Series, DDR4-3200MHz, in 18 DIMM slots (P1-DIMMB2 and P2-DIMMB2 are reserved for Intel® Optane Persistent Memory 200 Series only)
4 PCIe 4.0 x16 Low Profile (LP);
2 PCIe 4.0 x8 Low Profile (LP)
Dual 10GBase-T LAN with Intel® X550 Ethernet Controller
3 heavy duty Hot-swappable 13.5K RPM Middle Cooling Fans with optimal fan speed control;1 air shroud
1200W Redundant Power Supplies Titanium level 100-240Vac and 200-240 Vdc
1 rear VGA, 1 Type A port, 2 COM Ports (1 front; 1 rear) and 6 USB ports (2 front USB 2.0 and 4 rear USB 3.0)

Specifications

Product SKUs
SuperServer SYS-620P-TRT

Motherboard
Super X12DPi-NT6

Processor
CPU	Dual Socket P+ (LGA-4189) 3rd Gen Intel® Xeon® Scalable processors
Core Count	Up to 36C/72T; Up to 60MB Cache per CPU
Note	Supports up to 270W TDP CPUs (Air Cooled)

System Memory
Memory	Slot Count: 16 DIMM slots Max Memory (2DPC): Up to 4TB 3200MT/s ECC DDR4 RDIMM/LRDIMM Supports Intel® Optane™ persistent memory 200 series View Memory Options

On-Board Devices
Chipset	Intel® C621A
Network Connectivity	2 RJ45 10GbE View AOC Options

Input / Output
LAN	1 RJ45 1 GbE Dedicated BMC LAN port(s)
USB	2 USB 2.0 port(s) (front) 4 USB 3.0 port(s) (rear)
Video	1 VGA port(s)
DOM	2 SuperDOM (Disk on Module) port(s)

System BIOS
BIOS Type	AMI 32MB SPI Flash EEPROM

Management
Software	SuperCloud Composer Supermicro Server Manager (SSM) Supermicro Update Manager (SUM) SuperDoctor® 5 Super Diagnostics Offline TAS: Supermicro Thin-Agent Service (TAS) SAA(new!)
Power configurations	ACPI/APM Power Management

Security
Hardware	Trusted Platform Module (TPM) 2.0 Silicon Root of Trust (RoT) – NIST 800-193 Compliant
Features	Cryptographically Signed Firmware Secure Boot Secure Firmware Updates Automatic Firmware Recovery System Lockdown

PC Health Monitoring
CPU	Monitors for CPU Cores, Chipset Voltages, Memory 4+1 Phase-switching voltage regulator
FAN	Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment Thermal Control for fan connectors

Chassis
Form Factor	2U Rackmount
Model	CSE-825BTS-R1K23LPP1

Dimensions and Weight
Height	3.5" (89 mm)
Width	17.2" (437 mm)
Depth	25.5" (647 mm)
Package	11.4" (H) x 26.7" (W) x 34.5" (D)
Weight	Gross Weight: 69 lbs (31.2 kg) Net Weight: 36.38 lbs (16.5 kg)
Available Color	Black

Front Panel
LED	HDD activity Network activity Power status System information (overheat/UID)
Buttons	Power On/Off System Reset

Expansion Slots
PCI-Express (PCIe) Configuration	Default 2 PCIe 4.0 x8 LP slot(s) 4 PCIe 4.0 x16 LP slot(s) View AOC Options

Drive Bays / Storage
Drive Bays Configuration	Default: Total 8 bay(s) 8 front hot-swap 3.5" SAS/SATA drive bay(s) Option A: Total 10 bay(s) 8 front hot-swap 3.5" SAS/SATA drive bay(s) 2 front fixed 3.5" NVMe/SATA drive bay(s) (*NVMe/SAS/SATA support may require additional storage controller and/or cables, please see the optional parts list for details) View Drive Options
M.2	1 M.2 NVMe slot(s) (M-key) View M.2 Options
Peripheral Bays	1 slim DVD bay(s) (optional)

System Cooling
Fans	3 heavy duty fans with optimal fan speed control

Power Supply

1x 1200W Redundant Titanium Level power supply

Dimension (WxHxL)	76 x 40 x 336 mm
+12V	Max: 83A / Min: 0A (100Vac-127Vac)
	Max: 100A / Min: 0A (200Vdc-240Vdc)
	Max: 100A / Min: 0A (200Vac-240Vac)
5V SB	Max: 4A / Min: 0A
AC Input	1000W: 100-127Vac / 50-60Hz
	1200W: 200-240Vac / 50-60Hz
	1200W: 200-240Vdc / 50-60Hz (for CCC only)
Output Type	Backplanes (gold finger)

Operating Environment
ROHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (Non-Condensing) Non-operating Relative Humidity: 5% to 95% (Non-Condensing)

Parts List

Standard Parts (Parts Included)
	Part Number	Qty	Description
Motherboard / Chassis	MBD-X12DPi-NT6 CSE-825BTS-R1K23LPP1	1 1	Super X12DPi-NT6 Motherboard 2U Chassis
Backplane	BPN-SAS3-825TQ	1	8-port 2U SAS3 12Gbps TQ backplane, support up to 8x 3.5-inch SAS3/SATA3 HDD/SSD
Cable	CBL-0343L-01	2	30AWG IPASS/4SATA 76/66/54/45CM W/SB
	CBL-0071L	1	ROUND 16 TO 16 PIN RIBBON FP CABLE 30"L, LF
	CBL-PWCD-0160-IS	2	PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,16AWG,RoHS/REACH
	CBL-PWEX-1078	3	PWEX,FAN,1X4/P2.5 TO 1X4/P2.54,20CM,22AWG,5A/PIN,RoHS
Drive Tray(s)	MCP-220-00007-01	1	Black USB/COM port tray for SC825, 836
	MCP-220-00023-01	1	Black USB dummy tray support 1x 2.5" slim HDD for SC825, 836
	MCP-220-00075-0B	8	Black gen 5.5 hot-swap 3.5" HDD tray
	MCP-220-82502-0B	2	Black fixed 3.5\" HDD tray or FDD dummy tray
	MCP-290-82607-0N	1	826B/216B rear dummy cover for 2 X 2.5" HDD cage,RoHS
Parts	MCP-260-00042-0N	1	STD I/O shield for X9 socket R server MB with Gasket.
Manual	MNL-2241-QRG	1	SYS-620P-TR(T) Quick Reference Guide
Software	SFT-OOB-LIC	1	License key for enabling OOB BIOS management
Heatsink / Retention	SNK-P0078P	1	2U Passive CPU Heat Sink for X12 Generation Intel Whitley and Cedar Island Platforms
Heatsink / Retention	SNK-P0078PC	1	2U Passive CPU Heat Sink w/ a Side Air Channel for X12 Generation Intel Whitley and Cedar Island Platforms
*Power Supply	PWS-1K23A-1R	2	AC-DC 1200W, Titanium Level, Redundancy, 1U, PMBUS 1.2, +12V/+5Vsb, 336x76x40 mm,HF,RoHS/REACH
*Power Distributor	PDB-PT825-S8824	1	SC825 24PIN REDUNDANT PWR DISTRIBUTOR W/ SHORT CBL
*Fan	FAN-0206L4	3	80x80x38 mm, 13.5K RPM, Middle Cooling Fan for 2U and above Servers
*Front Panel	FPB-FP836-D	1	Front control board Dual color LED(FP836-D)forSC823M,825,825
*Rear Window	MCP-240-82608-0N	1	216B/826B LP rear window,RoHS/REACH,PBF
*Peripheral Drive	MCP-290-00007-01	1	Black DVD dummy cover for SC825, 836
*Rail Set	MCP-290-00053-0N	1	Rail set, quick/quick, default for 2,3U 17.2"W
*Rail Set	MCP-290-00060-0N	1	Threaded rail adapter default for round hole rack
*Air Shroud	MCP-310-29001-0N	1	SC825/826/216/213 Intel DP X9,X8 air shroud 13.68x13/12x13
Notes: Parts with * are inside the chassis Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.

Optional Parts List
	Part Number	Qty	Description
Optional Gen3 8-ports SAS Raid controller kit for SYS-620P-TRT	1x AOC-S3108L-H8IR or AOC-S3108L-H8IR-16DD + 2x CBL-SAST-0699 ( or 2x CBL-SAST-0556)	1	Convert 8x hotswap SATA drives to SAS drives
Optional Gen4 8-ports SAS Raid controller kit for SYS-620P-TRT	1x AOC-S3908L-H8IR-P or AOC-S3908L-H8IR-16DD-P or AOC-S3908L-H8IR-32DD-P + 1x CBL-SAST-1270S-100	1	Convert 8x hotswap SATA drives to SAS drives
Optional parts needed to support 2x fixed NVMe drives	1x CBL-SAST-0953 (Slimline x8 to PCIe 2x SFF-8639 Power) and 2x MCP-110-82501-0N	1	1x MCP-110-82501-0N can support 1x 2.5 inch NVMe fixed drives and 1x CBL-SAST-0953 can support 2x 2.5 inch NMVe drives
Optional parts needed to support 2x fixed SATA drives	2x CBL-0044L(SATA CABLE 61CM FLAT S-S PBF.26AWG flat) and 1x CBL-0082L (Y split , big 4 pin to two RA SATA power extension 15cm, 18AWG)	1	1x CBL-0044L can support 1x 2.5 inch SATA drives and 1x CBL-0082L can support 2x 2.5 inch SATA drives
Optional parts needed to support 2x Rear hotswap SATA drives	1x MCP-220-82616-0N, (2.5x2 Hot-swap 12G rear HDD kit w/ fail LED for 216B/826B/41) and 1x CBL-SAST-0388L-02, 30AWG Ipass to 4SATA (90/90/70/70CM W/ 90CM SB);	1	1x CBL-SAST-0388L-02 has 4 SATA ports, but the rear drive kit MCP-220-82616-0N can only support 2x 2.5 inch SATA drives, so two SATA ports are lost as a result
use 1x BTR-TFM8G-LSICVM02 and 1x BKT-BBU-BRACKET-05 with AOC-S3108L-H8IR-16DD or AOC-S3108L-H8IR	use 1x BTR-TFM8G-LSICVM02 and 1x BKT-BBU-BRACKET-05 with AOC-S3108L-H8IR-16DD or AOC-S3108L-H8IR	1	SuperCap and mounting bracket used for SAS raid controllers