A+ Server 2114GT-DPNR

2U 2-Node System with UP AMD and Up to 3 GPUs per node

Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system (Per node, minimum 1 CPU, 2 DIMMs, 1 U.2 or M.2 NVMe, 1 AIOM, 1 GPU installed). Add on Cards (AOC) are recommended to be installed by Supermicro due to optimized density of the 2U form factor.
Service: OSNBD3 is highly recommended.
Request Pricing
AMD logo
  • Media / Video Streaming
  • AI Inference and Machine Learning
  • GPU Virtualization (VDI)
  • Industrial Automation, Retail, Smart Medical Expert System

Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

 

1.  AMD Ryzen™ Threadripper™ PRO 5000WX/3000WX Series Processor, up to 64 Cores

 

2.  2TB Registered ECC DDR4 3200MHz SDRAM in 8 DIMMs

 

3.  2 PCI-E Gen 4 x16 external slots, 1 PCI-E 4.0 x8 AIOM slot (or optional x16 AIOM w/ additional parts)
      M.2 Interface: 2 PCI-E 4.0 x4
      M.2 Form Factor: 2280, 22110
      M.2 Key: M-key

 

4.  Integrated IPMI 2.0 + KVM with  dedicated LAN
      • Software Out of Band License key
        (SFT-OOB-LIC) included for OOB BIOS management

 

5.  2 front Hot-swap 2.5″ U.2 NVMe Gen4 drive bays

 

6.  AST2600 BMC

 

7.  2600W Redundant (1+1) Power Supplies
     Titanium Level (96%)
     (Full redundancy based on configuration and application load)

 
Product SKUs
 
AS -2114GT-DPNR
  • A+ Server 2114GT-DPNR (Black)
 
Motherboard (per Node)
 

Super H12SSG-ANP6
 
Processor (per Node)
 
CPU
  • AMD Ryzen™ Threadripper™ PRO 5000WX/3000WX Series Processor, up to 64 Cores
  • Socket SP3
  • Supports CPU TDP up to 280W*
Cores
  • Up to 64 Cores
Chipset
  • System on Chip (SoC)
Note * Certain CPUs with high TDP may be supported only under specific conditions. Please contact Tech Standard Solutions Technical Support for additional information about specialized system optimization
GPU Support (per Node)
  • Up to 3 double-width or 6 single-width GPUs
 
System Memory (per Node)
 
Memory Capacity
  • 8 DIMM slots
  • Up to 2TB 3DS ECC DDR4-3200MH SDRAM
Memory Type
  • 3200MHz ECC DDR4 SDRAM
 
On-Board Devices (per Node)
 
Network
  • Flexible networking via AIOM
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics & System Management
  • ASPEED AST2600 BMC
 
Input / Output (per Node)
 
SATA
  • N/A
LAN
  • Flexible networking provided by AIOM
  • 1 RJ45 1GbE Dedicated IPMI management port
USB
  • 2 USB 3.0 ports (rear)
Video
  • 1 VGA Connector (rear)
Others
  • 1 COM port (header)
  • 1 TPM 2.0 (header)
 
System BIOS (per Node)
 
BIOS Type
  • AMI 256Mb SPI Flash ROM
 
Management (per Node)
 
Software
  • IPMI 2.0
  • KVM with dedicated LAN
  • SSM, SPM, SUM
  • SuperDoctor® 5
  • Watchdog
 
PC Health Monitoring
 
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 2U Rackmountable
Model
  • CSE-227GTS-R2K63P
 
Dimensions
Height
  • 3.47" (88mm)
Width
  • 17.6" (447mm)
Depth
  • 29.9" (760mm)
Package
  • 9.44" (240mm) H x 23.62" (600mm) W x 43.3" (1100mm) D
Weight
  • Net Weight: 55 lbs (24.94 kg)
  • Gross Weight: 60 lbs (27.21 kg)
Available Colors
  • Black
 
Drive Bays / Storage (per Node)
Hot-swap
  • 2 front Hot-swap 2.5" U.2 NVMe Gen4 drive bays
 
Expansion Slots (per Node)
PCI-Express
  • 2 PCI-E Gen 4 x16 external slots
  • 1 PCI-E Gen 4 x8 AIOM networking slot (or optional x16 AIOM w/ additional parts)
 
System Cooling
Fans
  • 4 Hot-swap heavy duty 80mm PWM fans
 
Power Supply
2600W Redundant Power Supplies with PM Bus
Total Output Power and Input
  • 2600W with Input 200-240Vac
  • 2600W with Input 200-240Vdc (for CQC only)
Dimension
(W x H x L)
  • 40 x 73.5 x 265 mm
+12V
  • Max: 216A / Min: 0A (200-240 Vac)
+12Vsb
  • Max: 4.5A / Min: 0A
Output Type
  • Gold Finger Connector
Certification (Pending) Titanium Level
 
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
    -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
 
Optional Parts List
 
  Part Number Qty Description
Up to 5x NVIDIA A10 per node RSC-GFR-66G4 1 per node 1U Front RHS GPU Riser card with two PCI-E4.0x16slots
CBL-PWEX-1059 1 per node GPU,2x4F/RA/CPU to two (2x3F+2x1F)/PCIe,P4.2, 36CM,17/20AWG
CBL-PWEX-1040 2 per node PWYCB,GPU,2x4M/CPU to two (2x3F+2x1F)/PCIe,P4.2, 5CM,16/20AW
CBL-SAST-1295LP-85 2 per node SlimlineLP x8 (RA) to SlimlineLP x8 (STR),12CM,85 OHM
CBL-SAST-1202LPB-85 1 per node 2x SlimSASLP x8 (STR) to 2x SlimSASLP x8 (STR),BNDL,FOL
CBL-SAST-1228LP-85 3 per node SlimlineLP x8 (STR) to Slimline x8 (STR),28CM,85 OHM
CBL-SAST-1224LP-85 1 per node SlimlineLP x8 (STR) to SlimlineLP x8 (RE),24CM,85 OHM
MCP-120-22710-0N 2 per node NVIDIA GPU A10 PCIe internal bracket for SC227G
MCP-310-22713-0B 1 per node Sponge air block-B for SC227G
3x NVIDIA A40 per node MCP-310-22713-0B 1 per node Sponge air block-B for SC227G
MCP-120-22709-0N 1 per node NVIDIA GPU universal internal bracket (w/ DW) for SC227G
2x NVIDIA A100/A30 per node MCP-120-22709-0N 2 per node NVIDIA GPU universal internal bracket (w/ DW) for SC227G
3x NVIDIA A100/A30 per node MCP-120-22709-0N 2 per node NVIDIA GPU universal internal bracket (w/ DW) for SC227G
MCP-310-22713-0B 1 per node Sponge air block-B for SC227G
2x NVIDIA A16 MCP-120-22709-0N 2 per node NVIDIA GPU universal internal bracket (w/ DW) for SC227G
3x NVIDIA A16 MCP-120-22709-0N 2 per node NVIDIA GPU universal internal bracket (w/ DW) for SC227G
MCP-310-22713-0B 1 per node Sponge air block-B for SC227G
1x RTX 5000 ADA per node CBL-PWEX-0960-30 → in GPU slot2 1 per node 12VHPWR 2x6+4S to 2 X4,ATX PH4.2,50cm,9.5A/p,16AWG,RoHS
SNK-P0062V* 1 per node 1U Passive Proprietary Vapor Chamber
MCP-310-22714-0B* 1 per node Mylar air shroud-C2 H12SSG-AN6 for SC227G
CBL-SAST-1209F-85** 2 per node SlimSAS (x8 STR to x8 STR),9CM,FFC,FOLD,85 OHM,RoHS
CBL-SAST-1224LP-85** 1 per node SlimlineLP x8 (STR) to SlimlineLP x8 (RE),24CM,85 OHM
CBL-SAST-1201LL4FB-85** 1 per node 2x (SlimSAS LP,x8 to x8,STR),BNDL,FLD,FFC,85 OHM,RoHS
Note:
* Please check the "Thermal Test Report" to determine whether this wider-dimension Heatsink (SNK-P0062V) & Air Shroud (MCP-310-22714-0B) are needed for Threadripper PROC CPU cooling.
** Add when using AIOM x16 PCIe Lanes Card.
2x RTX 5000 ADA per node CBL-PWEX-0960-50 → in GPU slot3 & slot5 2 per node 12VHPWR 2x6+4S to 2 X4,ATX PH4.2,50cm,9.5A/p,16AWG,RoHS
SNK-P0062V* 1 per node 1U Passive Proprietary Vapor Chamber
MCP-310-22714-0B* 1 per node Mylar air shroud-C2 H12SSG-AN6 for SC227G
CBL-SAST-1209F-85** 2 per node SlimSAS (x8 STR to x8 STR),9CM,FFC,FOLD,85 OHM,RoHS
CBL-SAST-1224LP-85** 1 per node SlimlineLP x8 (STR) to SlimlineLP x8 (RE),24CM,85 OHM
CBL-SAST-1201LL4FB-85** 1 per node 2x (SlimSAS LP,x8 to x8,STR),BNDL,FLD,FFC,85 OHM,RoHS
Note:
* Please check the "Thermal Test Report" to determine whether this wider-dimension Heatsink (SNK-P0062V) & Air Shroud (MCP-310-22714-0B) are needed for Threadripper PROC CPU cooling.
** Add when using AIOM x16 PCIe Lanes Card.
3x RTX 5000 ADA per node CBL-PWEX-0960-50 → for GPU slot3 & slot5 2 per node 12VHPWR 2x6+4S to 2 X4,ATX PH4.2,50cm,9.5A/p,16AWG,RoHS
CBL-PWEX-0960-30 → for GPU slot2 1 per node 12VHPWR 2x6+4S to 2X4F,ATX PH4.2,30cm,9.5A/p,16# RoHS
SNK-P0062V* 1 per node 1U Passive Proprietary Vapor Chamber
MCP-310-22714-0B* 1 per node Mylar air shroud-C2 H12SSG-AN6 for SC227G
CBL-SAST-1209F-85** 2 per node SlimSAS (x8 STR to x8 STR),9CM,FFC,FOLD,85 OHM,RoHS
CBL-SAST-1224LP-85** 1 per node SlimlineLP x8 (STR) to SlimlineLP x8 (RE),24CM,85 OHM
CBL-SAST-1201LL4FB-85** 1 per node 2x (SlimSAS LP,x8 to x8,STR),BNDL,FLD,FFC,85 OHM,RoHS
Note:
* Please check the "Thermal Test Report" to determine whether this wider-dimension Heatsink (SNK-P0062V) & Air Shroud (MCP-310-22714-0B) are needed for Threadripper PROC CPU cooling.
** Add when using AIOM x16 PCIe Lanes Card.
2x RTX A6000 per node MCP-120-22709-0N 2 per node NVIDIA GPU universal internal bracket (w/ DW) for SC227G
2x RTX A5000 per node CBL-PWEX-1059 1 per node GPU,2x4F/RA/CPU to two (2x3F+2x1F)/PCIe,P4.2, 36CM,17/20AWG
CBL-PWEX-1040 1 per node PWYCB,GPU,2x4M/CPU to two (2x3F+2x1F)/PCIe,P4.2, 5CM,16/20AW
MCP-120-22709-0N 2 per node NVIDIA GPU universal internal bracket (w/ DW) for SC227G
3x RTX A5000 per node CBL-PWEX-1059 1 per node GPU,2x4F/RA/CPU to two (2x3F+2x1F)/PCIe,P4.2, 36CM,17/20AWG
CBL-PWEX-1040 2 per node PWYCB,GPU,2x4M/CPU to two (2x3F+2x1F)/PCIe,P4.2, 5CM,16/20AW
MCP-310-22713-0B 1 per node Sponge air block-B for SC227G
MCP-120-22709-0N 2 per node NVIDIA GPU universal internal bracket (w/ DW) for SC227G
1x RTX A4500 per node CBL-PWEX-1040 1 per node PWYCB,GPU,2x4M/CPU to two (2x3F+2x1F)/PCIe,P4.2, 5CM,16/20AW
MCP-120-22709-0N 1 per node NVIDIA GPU universal internal bracket (w/ DW) for SC227G
CBL-SAST-1201LL4FB-85* 1 per node 2x (SlimSAS LP,x8 to x8,STR),BNDL,FLD,FFC,85 OHM,RoHS
Note:
* Add CBL-SAST-1201LL4FB-85 when using AIOM x 16 PCIe Lanes Card.
2x RTX A4500 per node CBL-PWEX-1059 1 per node GPU,2x4F/RA/CPU to two (2x3F+2x1F)/PCIe,P4.2, 36CM,17/20AWG
CBL-PWEX-1040 1 per node PWYCB,GPU,2x4M/CPU to two (2x3F+2x1F)/PCIe,P4.2, 5CM,16/20AW
MCP-120-22709-0N 2 per node NVIDIA GPU universal internal bracket (w/ DW) for SC227G
CBL-SAST-1201LL4FB-85* 1 per node 2x (SlimSAS LP,x8 to x8,STR),BNDL,FLD,FFC,85 OHM,RoHS
Note:
* Add CBL-SAST-1201LL4FB-85 when using AIOM x 16 PCIe Lanes Card.
3x RTX A4500 per node CBL-PWEX-1059 1 per node GPU,2x4F/RA/CPU to two (2x3F+2x1F)/PCIe,P4.2, 36CM,17/20AWG
CBL-PWEX-1040 2 per node PWYCB,GPU,2x4M/CPU to two (2x3F+2x1F)/PCIe,P4.2, 5CM,16/20AW
MCP-120-22709-0N 2 per node NVIDIA GPU universal internal bracket (w/ DW) for SC227G
MCP-310-22713-0B 1 per node Sponge air block-B for 3rd DW GPU in SC227G
CBL-SAST-1201LL4FB-85* 1 per node 2x (SlimSAS LP,x8 to x8,STR),BNDL,FLD,FFC,85 OHM,RoHS
Note:
* Add CBL-SAST-1201LL4FB-85 when using AIOM x 16 PCIe Lanes Card.
Up to 4x NVIDIA A4000 (GPU-NVQRTX-A4000) RSC-GFR-66G4 1 per node 1U Front RHS GPU Riser card with two PCI-E 4.0 x16 slots
CBL-PWEX-1059 1 per node GPU,2x4F/RA/CPU to two (2x3F+2x1F)/PCIe,P4.2, 36CM,17/20AWG
CBL-PWEX-1040 2 per node PWYCB,GPU,2x4M/CPU to two (2x3F+2x1F)/PCIe,P4.2, 5CM,16/20AW
CBL-SAST-1295LP-85 2 per node SlimlineLP x8 (RA) to SlimlineLP x8 (STR),12CM,85 OHM
CBL-SAST-1202LPB-85 1 per node 2x SlimSASLP x8 (STR) to 2x SlimSASLP x8 (STR),BNDL,FOL
CBL-SAST-1228LP-85 3 per node SlimlineLP x8 (STR) to Slimline x8 (STR),28CM,85 OHM
CBL-SAST-1224LP-85 1 per node SlimlineLP x8 (STR) to SlimlineLP x8 (RE),24CM,85 OHM
MCP-120-22708-0N 2 per node NVIDIA GPU RTX-A4000 PCIe internal bracket for SC227G
MCP-310-22713-0B* 1 per node Sponge air block-B for SC227G
SNK-P0062V** 1 per node 1U Passive Proprietary Vapor Chamber CPU HS, AS-2114GT-DNR
MCP-310-22714-0B** 1 per node Mylar air shroud-C2 H12SSG-AN6 for SC227G
CBL-SAST-1201LL4FB-85*** 1 per node 2x (SlimSAS LP,x8 to x8,STR),BNDL,FLD,FFC,85 OHM,RoHS
Note:
* Add MCP-310-22713-0B for 3x GPUs. Sponge is installed in the rear of the GPU.
** Add SNK-P0062V and MCP-310-22714-0B – Please check the "Thermal Test Report" to determine whether it needs these wider-dimension heatsink & Air shroud for Threadripper PROC CPU cooling.
*** Add CBL-SAST-1201LL4FB-85 when using AIOM x16 PCIe Lanes Card (Configuration3)
Up to 6x T4 RSC-GFR-66G4 1 per node 1U Front RHS GPU Riser card with two PCI-E4.0x16slots
CBL-SAST-1295LP-85 2 per node SlimlineLP x8 (RA) to SlimlineLP x8 (STR),12CM,85 OHM
CBL-SAST-1202LPB-85 1 per node 2x SlimSASLP x8 (STR) to 2x SlimSASLP x8 (STR),BNDL,FOL
CBL-SAST-1228LP-85 3 per node SlimlineLP x8 (STR) to Slimline x8 (STR),28CM,85 OHM
CBL-SAST-1224LP-85 1 per node SlimlineLP x8 (STR) to SlimlineLP x8 (RE),24CM,85 OHM
MCP-310-22713-0B 1 per node Sponge air block-B for SC227G
MCP-120-22705-0N 2 per node NVIDIA GPU T4 PCIe internal bracket for SC227G
Up to 6x A2 RSC-GFR-66G4 1 per node 1U Front RHS GPU Riser card with two PCI-E4.0x16slots
CBL-SAST-1295LP-85 2 per node SlimlineLP x8 (RA) to SlimlineLP x8 (STR),12CM,85 OHM
CBL-SAST-1202LPB-85 1 per node 2x SlimSASLP x8 (STR) to 2x SlimSASLP x8 (STR),BNDL,FOL
CBL-SAST-1228LP-85 3 per node SlimlineLP x8 (STR) to Slimline x8 (STR),28CM,85 OHM
CBL-SAST-1224LP-85 1 per node SlimlineLP x8 (STR) to SlimlineLP x8 (RE),24CM,85 OHM
MCP-310-22713-0B 1 per node Sponge air block-B for SC227G
MCP-120-22710-0N 2 per node NVIDIA GPU universal internal bracket(w/ SW) for SC227G
2x MI100 per node CBL-PWEX-1059 1 per node GPU,2x4F/RA/CPU to two (2x3F+2x1F)/PCIe,P4.2, 36CM,17/20AWG
CBL-PWEX-1040 1 per node PWYCB,GPU,2x4M/CPU to two (2x3F+2x1F)/PCIe,P4.2, 5CM,16/20AW
MCP-120-22711-0N 2 per node AMD GPU MI100 PCIe internal bracket for SC227G
3x MI100 per node CBL-PWEX-1059 1 per node GPU,2x4F/RA/CPU to two (2x3F+2x1F)/PCIe,P4.2, 36CM,17/20AWG
CBL-PWEX-1040 2 per node PWYCB,GPU,2x4M/CPU to two (2x3F+2x1F)/PCIe,P4.2, 5CM,16/20AW
MCP-310-22713-0B 1 per node Sponge air block-B for SC227G
MCP-120-22711-0N 2 per node AMD GPU MI100 PCIe internal bracket for SC227G
2x MI210 per node MCP-120-22711-0N 2 per node AMD GPU universal internal bracket(w/ DW) for SC227G
3x MI210 per node MCP-120-22711-0N 2 per node AMD GPU universal internal bracket(w/ DW) for SC227G
MCP-310-22713-0B 1 per node Sponge air block-B for SC227G
TPM security module AOM-TPM-9671V - TPM 1.2 module (Vertical) with Infineon 9671
AOM-TPM-9670V - TPM 2.0 module (Vertical) with Infineon 9670
Global Services & Support OS4HR3/2/1
 
OSNBD3/2/1		 -
 
-		 3/2/1-year onsite 24x7x4 service
 
3/2/1-year onsite NBD service
 
SYS-121H-TNR parts list

Guaranteed support from day one

We’re committed to having your back no matter the issue or time of day, starting when we first connect.

Experts on standby when needed icon

Experts on standby when needed

Get the answers you need fast with guidance from our support team.

Price match anyone icon

Price match anyone

Stay within your budget by paying the lowest, most up-to-date market prices.

Free ground shipping on everything icon

Free ground shipping on everything

Avoid paying hefty shipping fees each time you need a new product.

Talk to a solution expert today

Learn how we level up your systems for a quicker, more efficient workflow.

Contact Us
Tech Standard Solutions logo

747-300-5288